hsg>clear cli
hsg>set multibus copy=this
hsg>set this mirrored_cache
hsg>set this port_1_topology=fabric
hsg>set this port_2_topology=fabric
hsg>set oth port_1_topology=fabric
hsg>set oth port_2_topology=fabric
hsg>show connect
hsg>run config
hsg>add raidset r0 diskxxxxx (raid 5)
hsg>add mirrorset m0 diskxxxxx (raid 1)
hsg>add stripeset s0 diskxxxxx (raid 0)
hsg>add spareset diskxxxxx (hot spare)
hsg>SET FAILEDSET AUTOSPARE
hsg>show r0 (m0,s0)
hsg>init r0 (m0,s0)
hsg>create_partition r0 size=xx (xx=xx%_ac)
hsg>create_partition r0 size=xx (xx=xx%)
hsg>create_partition r0 SIZE=LARGEST
hsg>add unit d0 r0 partition=1
hsg>add unit d0 r0 partition=2
hsg>set d0 disable_access= (all)
hsg>set d1 enable_access_path=
hsg>SET D1 DISABLE_ACCESS_PATH=ALL
hsg>set d1 enable_access_path=MTN1B2
hsg>SET D101 ENABLE_ACCESS_PATH=(WILLOW1A1,WILLOW2B2)
HSG> SET D1 ENABLE_ACCESS_PATH=(!NEWCON01,!NEWCON02,!NEWCON03,!NEWCON04)
HSG> SET D0 ENABLE_ACCESS_PATH=(!NEWCON00,!NEWCON05,!NEWCON06,!NEWCON0
HST> SET D6 ENABLE_ACCESS_PATH=(85008-04,85008-03,85008-02,85008-01,85004-04,85004-03 ,85004-02,85004-01)
set d10 enable_access_path=(5801-1,5801-2,5801-3,5801-4,5802-1,5802-2,5802-3,5802-4)
SET FAILEDSET AUTOSPARESET FAILEDSET AUTOSPARE
hsg> show faildset
hsg>delete faildset
hsg>run frutil (change battery)
raid 10
hsg>add mirrorset mirr1 diskxxxxx diskxxxxx
hsg>add mirrorset mirr2 diskxxxxx diskxxxxx
hsg>add mirrorset mirr3 diskxxxxx diskxxxxx
hsg>add stripeset stripe1 mirr1 mirr2 mirr3
hsg>init stripe1
hsg>show stripe1
hsg>add
hsg>set !newcon01 operating_system winntse
hsg>show this_controller full
copy single disk unit or mirrorset unit
hsg>run clone
clear all config
hsg>clear oth/thi invalid_catche destroy_unflushed_data
list all connect
hsg>show connect
list all unit
hsg>show units
erase all config
hsg>configuration reset
add raidset raid0 disk10000 disk10100 disk10200 disk10300 disk10400 disk10500 disk10800 disk20000 disk20100 disk20200 disk20300 disk20400 disk20500